We ran into a situation with one of our customers. They ordered a beautiful, C.H.I., dark oak, faux wood, accent door. We accidently installed the decorative hardware, 2 handles and 4 strap hinges. They didn’t want the hardware on their door.
Rather than replace the sections, we decided to cover up the holes instead. Our customers were open to see what we could do. If they did not approve, we would have ordered replacement sections.
Here are our steps to removing decorative hardware.
- Wander around Home Depot to find a product to cover the hole. We found Everbilt Screw Covers. They come in white, black and almond.
- Purchase a paint to match. This particular color is a little more difficult to match. If the door is white, almond, sandstone or brown, it is easier to match. If you have painted the door to match the house trim, that would be even better. Even though this color is more difficult, it isn’t impossible. We found Rustoleum Gloss Leather Brown that worked out perfectly.
- Paint each of the screw covers with a small paintbrush. We gave them a wood grain texture by leaving some of the black visible.
- Remove the existing hardware from the door.
- Trim the holes down a bit with the tip of a drill. We did this so the screw head covers would lay flush with the face of the door.
- Apply some 2 part apoxy to the back to make sure they won’t come out. Then shove them in the holes.
- Admire your garage door.